McDermott's Select Series pairs one of the brand's performance shafts, Defy, i-Pro Slim or i-3, standard with a cue priced below where those shafts usually show up in the wider McDermott catalog. We carry 4 Select cues, 2 currently in stock, priced from about $640 to about $920. Two of the four run a carbon-fiber shaft and two run a classic wood shaft, so the line covers both ends of McDermott's shaft technology at a single, mid-range price point. Below is how the shaft options, joint and warranty terms break down model by model.
Every item is brand new and 100% genuine, backed by its full manufacturer warranty. Free shipping on orders over $98 (contiguous US) and 30-day returns. Every spec on this page is checked against the manufacturer's published data by our Wilmington, NC store team.
4.9/5 average from 10 customer reviews across McDermott Select Cues.
McDermott has built pool cues at its own factory in Menomonee Falls, Wisconsin since 1975, and the Select Series is where that manufacturing base meets the brand's performance-shaft technology at a lower price than McDermott typically charges for it. Every cue in the series still passes through the same production process McDermott uses across its catalog, more than 150 separate procedures per cue, starting from kiln-dried, hand-selected North American Hard Rock Maple. What sets Select apart from a plain wood-shaft cue is what ships with it standard: a Defy, i-Pro Slim or i-3 shaft rather than a straight maple shaft, at a price point closer to McDermott's entry lines than its top-tier custom builds. McDermott markets itself directly as an American company, and it backs the cues it builds domestically, Select included, with a lifetime warranty against warpage and manufacturing defects. Published retail listings corroborate the craftsmanship claim from outside the company, describing McDermott as family-owned and operated out of Menomonee Falls for more than 50 years and crediting its three-piece butt construction with helping its cues hold balance and stay stable, a construction method that applies to Select cues the same as any other line in the catalog.
Defy is McDermott's true carbon-fiber shaft, meaning the shaft has no wood core at all rather than carbon wrapped around maple. It uses SmacWrap, a vibration-dampening material McDermott says was originally developed for the aerospace industry, to absorb feedback so the hit feels and sounds quieter than a wood shaft while still gliding smoothly through the bridge hand.
i-Pro Slim keeps the shaft wood-faced but builds it from eight spliced pieces of maple, what McDermott calls Octadic Laminated Shaft Construction, wrapped around a triple-layer carbon-fiber core that runs the shaft's full length. McDermott describes the i-Pro line as the most radially consistent wooden shafts it has built, meaning the shaft holds closer to a true circle around its full length rather than flexing unevenly depending on which side strikes the cue ball.
The i-3 belongs to McDermott's Intimidator family, where carbon fiber runs the shaft's entire length using the company's proprietary Intimidator Carbon Energy construction and a Tenon Tip Technology at the ferrule end. McDermott calls the i-Shaft line the most radially consistent shaft it sells and normally reserves it for its higher-tier cues, which is one reason it turns up on some of the higher-priced Select builds rather than the entry ones.
McDermott specifies that a Select Series cue ships with one of these three shafts depending on the model, across 16 total colors in the manufacturer's full catalog. In the 4 Select cues we carry, two run a carbon-fiber-type shaft and two run a classic-wood-type shaft, so a Select buyer genuinely gets to choose between the fully carbon-fiber feel and a wood shaft built around a carbon-fiber core, all under the same Select name.
The four Select cues we stock span a tighter price range than most other McDermott series: the SL10, in black with grey rings on a 12.5mm Defy shaft, is the line's highest current price at $918, followed by the SL5 at $900. The SL3 and SL2 sit lower at $675 and $648. Because every Select cue ships with a performance shaft standard, the price differences here track the specific shaft and finish rather than a step up in build quality between models, unlike series where the cheapest models use a plain maple shaft and the pricier ones move to carbon fiber.
The SL10 pairs a black-painted Michigan maple forearm and matching butt sleeve with grey ring trim, a grey urethane butt plate carrying the gold McDermott logo, and a McDermott plug bumper, all built wrapless around a 12.50mm Defy carbon-fiber shaft. Because Defy has no wood core at all, the hit runs through SmacWrap's aerospace-derived damping material rather than a length of maple, on a standard 3/8x10 joint. It comes in 18, 19, 20 and 21 oz weight options and runs about $920, though it is out of stock at the moment. Full specs and restock updates are on the SL10 product page.
The SL2 sets a titanium grey stained birdseye maple forearm against a white pearl butt sleeve trimmed in silver, bone urethane and black index rings, wrapped in linen over an Ivorine III ferrule. Its 11.75mm i-3 Intimidator shaft runs carbon fiber the length of the blank on a European taper, built for players chasing more spin off a controlled stroke, and threads into the same 3/8x10 joint used across the rest of the Select line. Weight options run 18 through 21 oz, and the cue is in stock now for about $650 at the SL2 product page.
The SL3 shares the SL2's 11.75mm i-3 shaft and linen wrap but swaps in a light grey stained birdseye maple forearm and a butt sleeve set with six green urethane clover and white urethane diamond inlays, finished with a black-with-silver-dash collar and an Ivorine III ferrule. It runs the same 3/8x10 joint and 18 to 21 oz weight range as the rest of the series. The SL3 is out of stock at the moment, priced at about $680 when available on the SL3 product page.
The SL5 is finished wrapless in a Pacific blue stained birdseye maple forearm with a matching blue pearl butt sleeve set in silver and blue pearl index rings, over a carbon fiber composite ferrule. Its 12mm i-Pro Slim shaft splices eight pieces of maple around a full-length carbon-fiber core, McDermott's way of keeping a wood-faced feel while adding a carbon core's stability, on the same 3/8x10 joint. It's in stock now, offered in 18 through 21 oz weights, at about $900 on the SL5 product page.
The real decision inside Select is which shaft feel you want, not a step up in cue quality, since all four models go through the same McDermott construction process regardless of price. Defy, on the SL10, is a true carbon-fiber shaft with no wood at all, damped by McDermott's SmacWrap material for a quieter, lower-feedback hit; players on the AZBilliards forums are split on that feel, with some calling it magnificent and effortless on the cue ball and others finding it too soft or muted for their taste. The i-3 on the SL2 and SL3 runs carbon fiber the shaft's full length using McDermott's Intimidator Carbon Energy construction and is built for higher-level players chasing more spin, while the i-Pro Slim on the SL5 keeps a maple face wrapped around a full-length carbon core for a shaft McDermott says holds its shape more evenly than a plain maple blank. Forum posters comparing the Intimidator shafts to McDermott's standard G-Core describe them as stiffer but still noticeably deflective, and say the choice comes down to personal preference more than a clear technical winner.
Both the i-3 and i-Pro Slim shafts build around a carbon-fiber core, though in different ways. Cue makers use carbon fiber inside a shaft because it stiffens the blank without the natural variation you get in a length of maple, what McDermott calls radial consistency: the shaft performs the same way no matter which side strikes the cue ball. That consistency is why McDermott pairs its carbon-core technology with its tri-core butt construction to produce what the company brands the McDermott Hit.
McDermott builds every Select cue, i-Pro Slim shafts included, from the same base material as the rest of its lineup, kiln-dried, hand-selected North American Hard Rock Maple. On the i-Pro Slim, that wood forms eight spliced pieces bonded around the shaft's carbon core rather than a single blank, which is what gives the shaft its wood-faced feel despite the reinforcement underneath.
The tip is where all that shaft engineering meets the cue ball, and McDermott varies tip hardness by model. The i-3 runs a Kamui Black Super Soft tip for maximum contact time and spin at a lower stroke speed, while the SL5's i-Pro Slim uses a Navigator Alpha tip built with adjustable leather-fiber firmness to raise grip and cue ball spin when English is applied. A softer tip holds the ball longer for more spin; a firmer tip trades some of that spin for a more predictable, lower-maintenance hit. See our glossary for more on cue-building terms like taper and ferrule.
All four Select cues we carry use McDermott's standard 3/8x10 joint, the same pin used across most of McDermott's catalog, so a Select butt threads onto other 3/8x10 McDermott shafts. Shaft size splits across 11.75mm (2 cues), 12.50mm (1) and 12.00mm (1), noticeably tighter than the 13.00mm standard on McDermott's traditional wood-shaft lines. Shaft type splits evenly between carbon fiber (2) and classic wood (2), and wrap follows the same even split between linen wrap (2) and wrapless (2). If you're shopping for a spare or upgrade shaft to fit a Select butt, our shafts selection is sorted by size and joint so you can match a pin before you buy.
Select is built for a player who already wants a carbon-fiber or high-performance wood shaft under their hand but doesn't want to pay McDermott's higher-end custom pricing to get one. Because the SL2 and SL3 run classic-wood shafts at 11.75mm and 12mm rather than the standard 13mm, the line also covers players who want a tighter wood-shaft tip without stepping up to a full carbon build. McDermott's no-charge personalization program, weight, shaft size, wrap and stain all listed as interchangeable, applies to Select cues the same as the rest of the catalog, so a stock Select build can still be tuned at order time.
Every Select cue carries McDermott's Lifetime Warranty against manufacturing defects, including warpage, for as long as the original purchaser owns it, provided the cue was bought through an authorized McDermott retailer; the warpage clause specifically only covers cues built since 2004. Turning a shaft down below 11.75mm voids the warranty outright, which matters here since one of the four Select shaft sizes we carry is already at that 11.75mm floor, leaving no further room to thin it without losing coverage. McDermott also backs its American-made cues, Select included, with a free Lifetime Maintenance Plan; you cover return shipping, a flat $25 domestically via insured UPS Ground with signature required, and Select isn't on McDermott's short list of models excluded from butt refinishing under that plan.
Reaction to the Select Series' shaft choices on the AZBilliards forums runs mixed rather than settled. On the Defy carbon shaft, opinions split hard: some players who tried it side by side with other carbon shafts called the low-vibration, muted feel magnificent, while others found that same softness numbing and said they would rather have more feedback. The Intimidator i-shafts draw a similar split, with posters who have compared the i-2 and i-3 to McDermott's standard G-Core generally agreeing they are stiffer but still noticeably deflective, and more than one longtime forum member saying they still prefer McDermott's plain maple shaft over any of its carbon-core options. None of that is a knock on build quality, it is a reminder that shaft feel is personal, which is exactly why Select offers three different shaft technologies under one series name.
To compare a Select cue against McDermott's wood-shafted G-Series and GS-Series, or the fully carbon-fiber Vanquish line, see the McDermott Pool Cues category, or browse the full pool cues selection.
It depends on the model: McDermott ships Select Series cues with a Defy, i-Pro Slim or i-3 shaft standard, all performance shafts rather than plain maple.
McDermott offers the Select Series in 16 total colors across its full catalog.
The 4 Select cues we carry price from about $640 to about $920, depending on shaft and finish.
Yes. Select cues carry McDermott's Lifetime Warranty against defects and warpage, plus the company's free Lifetime Maintenance Plan on American-made cues.
All 4 Select cues we carry use McDermott's 3/8x10 joint; shaft size splits across 11.75mm, 12.50mm and 12.00mm depending on the model.
Learn about our up and coming Quarter King Billiards engineered products, get coupons to save $$$, stay up to date with our sales, and of course stay in the loop with our constantly changing used cues!