Every item is brand new and 100% genuine, backed by its full manufacturer warranty. Free shipping on orders over $98 (contiguous US) and 30-day returns. Every spec on this page is checked against the manufacturer's published data by our Wilmington, NC store team.
Every starter cue ships free within the continental US. Not sure which one to pick? Check our Pool Cue Purchasing Guide for personalized help.
A good first cue does not need to be expensive, but it does need a few fundamentals right. Start with a straight maple shaft — house cues get left leaning in racks for years and warp, and a warped shaft will fight you on every stroke no matter how good your fundamentals are. A slightly larger, forgiving tip diameter is easier to keep centered on the cue ball while you are still building a consistent stroke. Look for a standard joint, since it means the shaft can be replaced or upgraded later without buying a whole new cue. An adjustable weight bolt in the butt lets you dial the balance in as your stroke develops instead of locking you into one feel. Put those together and a real cue in the $70 to $150 range will outplay almost any warped, mismatched house cue sitting in a bar rack, and it is yours to keep improving with.
Taking care of a first cue is mostly about avoiding a few common mistakes. Store it flat in a case or upright in a rack rather than leaning it against a wall, where gravity and temperature changes slowly pull a shaft out of true. Keep it out of a car trunk and away from big humidity swings — wood moves with moisture, and repeated swings are the fastest way to warp a shaft. Chalk before every shot with a light twisting motion rather than grinding it on, and scuff the tip lightly with a scuffer or fine sandpaper when it starts to look shiny and hard, since a glazed tip causes miscues. Roll the shaft across a flat table every so often to check that it is still straight. When the tip has worn down thin or will not hold chalk anymore, it is time to have it replaced rather than playing through a bad hit.
The joint is what decides whether a shaft fits, and a good share of the cues in Starter Cues use the 5/16X18 pin. That is the same 5/16X18 pin used across Action, Meucci, Players, Rage, Valhalla and Xcel, so shafts move between them — always confirm the exact pin before buying.
The joint shapes how a cue hits. Radial and 3/8"x10 joints give a solid, low-deflection feel; quick-release joints make breakdown fast. Not sure? A radial or 3/8"x10 is a safe all-around pick.
Yes. A thinner shaft (11.75–12.5mm) puts more spin on the ball with a crisp hit, while a larger shaft (12.75–13mm) feels fuller and more forgiving.
Irish linen wicks sweat with a classic tacky grip. Leather is plush and premium. No-wrap is fast and low-maintenance.
The WPA equipment specification requires a cue at least 40 inches long and no more than 25 ounces, with a tip no wider than 14mm and any metal ferrule no longer than 1 inch. Standard two-piece playing cues fall inside those limits; league rules on jump and break cues vary, so check yours.
Cues carry the manufacturer's warranty against warpage and defects. See our Warranty and Return Policy pages for details.
Learn about our up and coming Quarter King Billiards engineered products, get coupons to save $$$, stay up to date with our sales, and of course stay in the loop with our constantly changing used cues!