Cynergy Propel is Cuetec's dedicated jump cue, an all-composite build that Cuetec says weighs about 11 ounces with its weighted extension attached. We carry all 3 Propel cues, all in stock, each priced at about $500. Where AVID Surge's jump cues use the fiberglass-bonded AVID shaft, Propel runs Cuetec's carbon fiber Cynergy technology in both the shaft and the handle, with an oversized 13.90mm tip built specifically for getting under a cue ball.
Quarter King Billiards is an authorized Cuetec dealer. Free shipping on orders over $98 (contiguous US) and 30-day returns. Every spec on this page is checked against the manufacturer's published data by our Wilmington, NC store team.
5.0/5 average from 40 customer reviews across Cuetec Propel Cues.
Cuetec's history goes back to 1989, when Taiwanese engineer Jones Chang brought a graphite-and-fiberglass cladding process over from tennis racket manufacturing and used it to build a line of eight billiard cue shafts, first sold through J-S Sales Co. of Mount Vernon, New York. Imperial International acquired J-S Sales in 2006 and has run Cuetec's U.S. agent and warranty program since, and the company's American operations today center on a showroom in Carlstadt, New Jersey.
Propel belongs to Cuetec's Cynergy family, the carbon-fiber composite platform the company engineers and builds entirely inside its own Advanced Composites Division. Unlike a playing or break cue, Propel is built for a single purpose: getting the cue ball off the table. We carry all 3 Propel cues, and all 3 are currently in stock.
Cuetec's own company history and independent player reviews both trace the brand's reputation to two eras: the original 1989 fiberglass-and-graphite-clad maple cues, and more recently the value-priced carbon fiber Cynergy shaft. Cynergy is Cuetec's carbon-fiber composite flagship platform, and Propel is the jump-cue expression of that same platform, engineered for one specific shot rather than general play. Like the rest of the Cynergy family, Propel is engineered and built entirely inside Cuetec's in-house Advanced Composites Division rather than assembled from outside-sourced components, the same manufacturing standard behind Cuetec's Cynergy playing cues and the Cynergy Breach break cue.
Cuetec builds Propel entirely from composite materials rather than wood, and the finished cue weighs about 11 ounces with its weighted extension attached, according to Cuetec's own specification. That is dramatically lighter than a typical playing cue, which is the point: a jump cue needs to move fast on a short, steep stroke, and extra mass works against that. That 11-ounce weight is roughly half what a typical 19 to 21-ounce playing cue weighs, which is by design; a jump cue's whole job is a short, fast, vertical stroke rather than a long, level one. Removing the weighted extension drops that number further, which is why Cuetec specifies the 11-ounce figure with the extension attached rather than as a fixed constant.
Cuetec puts its carbon fiber technology into both the shaft and the main handle of Propel, not just the shaft the way most of its playing cues do. That carries the stiffness and energy-transfer benefits of carbon fiber through the entire cue rather than stopping at the joint. Extending carbon fiber into the handle also keeps the whole cue lighter than a wood-handled jump cue of similar stiffness would be, reinforcing the ultralight build goal. It also means Propel does not rely on a wood core anywhere in its construction, unlike a hybrid jump cue that might pair a composite shaft with a traditional wood handle.
Propel's tip diameter is an oversized 13.90mm, notably wider than the 11.80mm to 12.75mm range most Cuetec playing shafts use. A wider, harder tip is standard jump-cue design, since it helps the cue get underneath the ball on a legal jump shot. That width difference is also why a Propel tip is not interchangeable with a standard Cuetec playing shaft's tip or ferrule, since the two are built to different diameters for different jobs. Cuetec applies the same oversized-tip logic on Propel that it applies on the AVID Surge jump cues, even though the two lines use different shaft materials, fiberglass-bonded maple on Surge and full carbon fiber on Propel, to reach a similar jump-shot outcome.
The Ghost Propel, CT140, is Cuetec's Ghost-branded colorway in the Propel line, priced at about $500, the same as the other two Propel builds. The Ghost branding here matches the same Ghost-themed cosmetic treatment Cuetec uses on its Cynergy Breach Ghost Edition break cue, though the two are unrelated mechanically.
The other two Propel jump cues, CT946 and CT947, round out the series at the same $500 price point with the identical all-composite, 13.90mm-tip construction. Cuetec's SKU-based naming on these two suggests they are standard production colorways rather than special editions, unlike the Ghost-branded CT140. All three models share the identical 11-ounce weight, 13.90mm tip, and all-composite build, so the choice among them is a matter of finish preference rather than a functional trade-off, the same pattern Cuetec follows across its Breach and Nineball colorway lineups.
All three Propel cues use Cuetec's 3/8x14 joint, the same thread found across most of Cuetec's AVID and Cynergy lines, paired with a 13.90mm carbon fiber shaft and shipped wrapless. Across our Propel listings, colors run Black, Red, and Grey, one apiece, matching the series' three-model lineup exactly. Because Propel's tip diameter is wider than the sizes most Cuetec playing shafts run, it is not a drop-in swap with a standard Cynergy or AVID shaft even though the joint thread matches; if you are shopping for a spare, check our shafts category specifically for jump-cue-diameter options rather than a standard playing shaft.
Propel is for players who want a dedicated jump cue built to the same composite-engineering standard as Cuetec's playing cues rather than a wood cue pressed into jump duty. The combination of an 11-ounce build weight and a wide 13.90mm tip is aimed squarely at legal jump shots rather than general play, and the all-composite construction, shaft and handle both, is meant to survive the repeated hard downward strokes a jump cue takes without the flex or wear a wood handle would show over time. It is a poor substitute for a general playing cue, since the oversized tip and ultralight build that make it good at jumping also make it a poor choice for normal shot-making. Players who already carry a Cynergy playing cue and a Breach break cue will find Propel completes the same in-house-built, three-cue rotation, one cue for each phase of a rack: break, play, and jump.
Propel carries Cuetec's limited lifetime warranty, activated by registering the cue on cuetec.com within 60 days of purchase. Coverage applies only to the original purchaser and is not transferable if you sell the cue later, and it requires the cue was purchased through an authorized Cuetec dealer, which we are. The warranty covers manufacturing and material defects, warpage included, checked by sighting the cue rather than rolling it, but not normal wear items: tips, ferrules, rubber bumpers, finish, and wraps or grips are all excluded, which matters on a jump cue since the tip takes repeated hard, off-center contact. The warranty is void if the cue is modified or abused, and claims start with the dealer, not with Cuetec or Imperial International directly. Cuetec's Sell Through Guarantee is separate from the warranty: an unchalked, unused, non-shelf-worn, current-model cue can be returned for credit or a same-value replacement if you cannot resell it yourself. Because a jump cue's tip absorbs unusually hard, off-center contact on every legal jump shot, expect to replace that tip more often than you would on a playing cue, and remember that replacement is a normal-wear cost the warranty does not cover. As with Cuetec's other Cynergy-family cues, register Propel promptly after purchase, since the same 60-day window and authorized-dealer requirement apply here as they do on a full-price playing cue.
Propel runs Cuetec's Cynergy carbon fiber technology, the same shaft family that gets mixed reviews from players on the AZBilliards forums. Some describe the Cynergy layup as playing close to a low-deflection maple shaft with strong energy transfer, while others call it whippy and less stable than shafts like the Predator Revo in side-by-side testing. On a jump cue built for one explosive stroke rather than touch and control, that deflection debate matters less than it does on a playing shaft, since Propel's carbon fiber construction is being asked to survive hard impact and transfer energy upward, not to minimize squirt on a soft draw shot. For a cue whose entire purpose is one explosive stroke, the deflection debate that dominates discussion of Cuetec's playing shafts is largely beside the point, since a jump cue is never asked to control cue-ball position the way a playing shaft is. Players shopping Propel are generally better served focusing on fit, weight, and tip diameter than on the shaft-feel debate that matters so much more on a playing cue purchase, since none of the reported deflection complaints in that debate concern how a jump cue performs on a single explosive stroke rather than a full rack of finesse shots, so shoppers new to jump cues should weigh Propel against how often they actually need a legal jump in their own games rather than against playing-shaft criteria.
Propel is part of our full Cuetec Pool Cues lineup alongside AVID Surge's jump cues and the rest of the Cynergy family. Browse our complete pool cues category for other dedicated jump cues.
The joint is what decides whether a shaft fits, and every cue in Cuetec Propel Cues uses the 3/8X14 pin. Match that pin on any replacement shaft, or ask us and we will confirm the fit.
Cuetec's dedicated jump cue, an all-composite build weighing about 11 ounces with its weighted extension attached and an oversized 13.90mm tip.
Cosmetic only. The Ghost Propel (CT140), CT946, and CT947 all share the identical 11-ounce, 13.90mm-tip, all-composite construction.
Not as a direct swap. Propel's 13.90mm tip is wider than the 11.80mm to 12.75mm range most Cuetec playing shafts use, even though the joint thread matches.
Cuetec's standard 3/8x14 joint, the same thread used across most of the AVID and Cynergy lines.
Yes, Cuetec's limited lifetime warranty applies once registered within 60 days of purchase, though it excludes tip and ferrule wear, which a jump cue takes heavily.
Learn about our up and coming Quarter King Billiards engineered products, get coupons to save $$$, stay up to date with our sales, and of course stay in the loop with our constantly changing used cues!