Break and jump cues do a different job than a playing cue, and Action builds this 21-cue line around that difference: nine of the twenty-one use Action's own quick-release joint and five use a separate Inox quick-release, both faster to disengage than a standard threaded joint, and six of the twenty-one step up to a wider 14.00mm shaft for extra mass behind the cue ball. Prices run $152.10 to $292.50, the widest spread of any Action series, and nineteen of the twenty-one are currently in stock. This is also the only place in Action's catalog carrying a carbon fiber shaft. Below, the current break and jump lineup.
Every item is brand new and 100% genuine, backed by its full manufacturer warranty. Free shipping on orders over $98 (contiguous US) and 30-day returns. Every spec on this page is checked against the manufacturer's published data by our Wilmington, NC store team.
4.8/5 average from 525 customer reviews across Action Break & Jump Cues.
Action is a private-label pool cue brand, manufactured in China across its full catalog according to the manufacturer's own specification sheet, rather than an independent maker with its own dedicated shop. Where most of Action's catalog is built as consistent playing cues sharing a single joint and shaft spec, the Break & Jump series is engineered differently on purpose: it's the one line in the brand's range built specifically for the two shots, the opening break and the jump shot, that put the most stress and speed through a cue rather than for the controlled rolls and draws of normal play. That difference in engineering intent, more than any branding, is what separates this series from the rest of the catalog, where the specification sheet shows far less variation series to series. Industry commentary on Action generally frames the brand around affordable, everyday cues for players at every level rather than specialty equipment, which makes this series something of an exception inside the catalog.
Fourteen of the twenty-one cues in this line use a quick-release joint, either Action's own version (nine SKUs) or a separate Inox-branded version (five SKUs), rather than the standard 5/16x18 thread found on seven of the twenty-one and on most of the rest of Action's catalog. A quick-release joint disengages in a partial turn instead of the several full rotations a threaded 5/16x18 joint needs, which matters specifically for a break cue: you can swap from your playing cue to your break cue and back between racks without unscrewing and rescrewing a full thread each time. Inox is standard shorthand for stainless steel, matching the stainless-steel collar option that also appears elsewhere in Action's catalog.
Six of the twenty-one cues step up from Action's standard 13.00mm shaft to a 14.00mm shaft, with one more at 13.50mm; the other fourteen keep the 13.00mm size used across the rest of the Action catalog. A wider shaft carries more mass and generally flexes less at contact, part of why break cues in general tend to run wider than a player's primary cue: more of the force from the stroke goes into moving the cue ball rather than into shaft flex. The manufacturer's spec sheet also lists a 29 inch length across the large majority of its catalog, the standard for a full-size adult cue, though it doesn't break shaft length out specifically for the wider 14.00mm rows in this series.
This series also holds the only carbon fiber shaft in Action's entire catalog; every other Action cue we carry uses a classic wood shaft. Carbon fiber is stiffer and more consistent than wood shaft to shaft, a common reason cue makers use it on break cues specifically, since a break doesn't call for the shaft to flex and load the way a finesse playing stroke does. Grip-wise, six of the twenty-one cues use a sport wrap rather than the linen or leather found on Action's playing lines, and eleven are wrapless; a sport wrap's grippier, more textured surface is generally chosen for shots where hand slip at high speed is the main risk. The manufacturer's spec sheet separately lists phenolic tips, a harder material than the layered leather tips on Action's playing cues, appearing mainly on break-oriented rows rather than playing cues, since a phenolic tip transfers more force into the cue ball instead of absorbing it the way a softer tip does.
Named models in the current lineup include the four Sport Break cues, ABK05 (red), ABK06 (white), ABK07 (blue) and ABK08 (yellow), all priced at $224.10, alongside the ACTBJ-numbered cues: ACTBJ05 at $251.10, ACTBJ06 and ACTBJ07 at $292.50 (the ceiling for this series and for Action's entire catalog), and ACTBJ09 at $202.50. Nineteen of the twenty-one SKUs are currently in stock. Color options run heaviest in black, with smaller runs in tan, brown, green, silver, red, pink, blue, white, purple and yellow, some of that spread coming from the color-matched Sport Break cues themselves. The four color-matched Sport Break cues give you a quick way to color-code a break cue by table or by player if you run multiple tables, since matching a specific color to a specific rack keeps break cues from getting mixed up with playing cues in a house rack.
Because this series mixes three different joint types, matching parts matters more here than on most of Action's other lines. Standard-thread cues in this series use the same 5/16x18 joint-type as most of Action's playing cues, so they'll cross-thread with other 5/16x18 shafts and cues. The Action and Inox quick-release joints are proprietary systems rather than a shared industry standard, so a quick-release shaft from this series generally won't thread onto a standard-joint Action playing cue, or the other way around; check the specific product listing before assuming a shaft will interchange. On shaft size, fourteen of the twenty-one cues use the same 13.00mm diameter as most of Action's catalog, while the six wider cues use a 14.00mm shaft that doesn't have its own listing page in our current attribute set, so compare those directly on the product page. If you're shopping specifically for a carbon fiber shaft, this series holds the only one in Action's catalog; our full shafts category covers spares and upgrades more broadly.
This is a specialty series rather than an everyday playing cue line: it suits a player who already owns a cue for normal shots and wants a dedicated break cue, a dedicated jump cue, or one cue built to do both. The spread in this series, from $152.10 up to $292.50, is the widest of any Action line, so there's room to buy a basic quick-release break cue at the low end or step up to the carbon-fiber-shaft or heavier ACTBJ models near the top. Because Action positions itself broadly as an affordable, everyday cue brand rather than a specialty equipment maker, treat this series as the exception inside that catalog: it's built around a specific job, protecting your primary cue from break and jump wear, more than around the brand's usual value-for-money playing-cue pitch. If you already know you prefer the stiffer, more uniform feel of a carbon fiber shaft over wood, this series is also the only place in Action's current catalog to get one.
The manufacturer's own specification sheet classifies warranty coverage on the large majority of its 466 catalogued Action SKUs, break and jump cues included, under a general "Limited" category, with a smaller share carrying a specific one-year term; the sheet doesn't spell out exclusions for tip wear, shaft warping, or joint damage, which matters more on a cue built to take repeated hard impacts, and that gap in the paperwork is worth noting on a break cue in particular, since heavy break use is exactly the kind of stress most likely to reveal a manufacturing defect early. Action cues are also commonly described elsewhere as backed by a one-year warranty against manufacturing defects. Across the manufacturer's full spec sheet, the large majority of Action cues (430 of 466 rows) ship without a case or joint protectors, so plan on a separate case if you're carrying a break cue alongside your regular playing cue.
Community sentiment on Action cues generally, gathered from AZBilliards forum threads, runs mixed on build consistency, with posters describing hit and construction as varying "a lot from cue to cue" within the same line. One poster who used entry-level cues as house cues for a rental setup reported they could take a beating and still play acceptably as long as the tip wasn't worn out, a relevant data point for a cue category built to absorb hard, repeated impact, though that same poster ranked Action's construction below two other brands and cautioned against paying full retail for more than one cue at a time. None of the sourced forum discussion speaks specifically to Action's break or jump cues rather than its playing cues, so treat that general sentiment as a starting point rather than a verdict on this series. That gap in direct break-cue commentary also means there's no forum consensus here on how these specific joints or the carbon fiber shaft hold up over time, so treat durability under repeated break stress as an area to research further if that's your main concern before buying.
For Action's standard playing cues built on the same 5/16x18 joint and 13.00mm shaft as some of this series, see the full Action Pool Cues category. To compare dedicated break and jump cues from other brands at a similar price, browse the wider pool cues catalog, and check our glossary if terms like quick-release joint or pro taper need a plain-English definition, and our compare tool can put a specific Break & Jump model side by side with a dedicated break cue from another brand.
The joint is what decides whether a shaft fits, and a good share of the cues in Action Break & Jump Cues use the Action Quick Release pin. Match that pin on any replacement shaft, or ask us and we will confirm the fit.
It varies: nine SKUs use Action's own quick-release joint, five use an Inox quick-release joint, and seven use the standard 5/16x18 thread found across Action's other cues.
Yes, one SKU in the Break & Jump series uses a carbon fiber shaft, the only carbon fiber shaft in Action's current catalog; every other Action cue uses a wood shaft.
All 21 SKUs are tagged for break use, and five of those are also tagged for jump use, suggesting some cues in the line are built to serve both roles.
Current prices run $152.10 to $292.50, the widest price range of any Action series, reflecting the mix of standard and quick-release joints and shaft sizes within the line.
Six of the 21 SKUs step up to a wider 14.00mm shaft, which carries more mass and flexes less at contact, a trait commonly associated with dedicated break cues.
Learn about our up and coming Quarter King Billiards engineered products, get coupons to save $$$, stay up to date with our sales, and of course stay in the loop with our constantly changing used cues!
